Galvanized Elbow Coupling 3 Way Pipe Fittings Hose Coupling
Product Details
| Customization: | Available |
|---|---|
| Casting Method: | Special Casting |
| Casting Form Material: | Metal |
Secured Trading Service
Diamond Member Since 2011
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Full Customization
R&D Capabilities
ODM Services
Management Certification
The supplier provides full customization services
The supplier has 7 R&D engineers, you can check the Audit Report for more information
The supplier provides ODM services
The supplier has quality management system certification, including:
ISO9001:2015 certificate
ISO9001:2015 certificate
Sign In to see all verified strength labels (21)
Find Similar Products
Basic Info.
- Casting Metal
- Cast Steel
- Casting Form Usage Count
- Semi-permanent
- Surface Treatment
- Polishing
- Surface Roughness
- Ra1.6
- Coating
- Zinc oxide
- Machining Tolerance
- +/-0.02mm
- Standard
- DIN
- Certification
- ISO 9001:2000, IATF16949
- Door Lock Part
- Lock
- Material
- Metal
- Drawing
- 2D/3D
- Package
- Carton
- Finish
- Polish.Sandblast
- Transport Package
- Carton
- Specification
- OEM
- Trademark
- CASTING
- Origin
- China
- Production Capacity
- 2000000
Product Description
Specification
Brief introduction about high pressure die casting
Die casting is the process where molten metal is injected into a mold under high pressure in the range of 10 - 210 Mpa. This will result in a highly uniform casting with very good surface finish and exceptional dimensional accuracy. Usually this can either eliminate or greatly reduce the machining required to finish the part.We can offer both the cold chamber process and the hot chamber process. In the cold chamber process the metal is ladled into the injection chamber for each shot. There is less exposure of the molten metal to the chamber walls and plunger. This is very useful for aluminum and copper alloys that would easily alloy with iron at elevated temperatures. The hot chamber process has the injection chamber which is connected to the die cavity permanently immersed in the molten metal. The hot chamber process is used for metals of low melting point and high fluidity such as tin and zinc.
The materials that Donrex offers are alloys of aluminum, copper, zinc and magnesium. Zinc castings can be made with thinner wall thickness than aluminum due to high melt fluidity.
We can produce parts from very small to about 50 kg (110lbs ) for aluminum, 10 kg ( 22 lbs ) for magnesium, 80 kg ( 176 lbs ) for zinc and 10 kg ( 22 lbs ) for copper.
The materials that Donrex offers are alloys of aluminum, copper, zinc and magnesium. Zinc castings can be made with thinner wall thickness than aluminum due to high melt fluidity.
We can produce parts from very small to about 50 kg (110lbs ) for aluminum, 10 kg ( 22 lbs ) for magnesium, 80 kg ( 176 lbs ) for zinc and 10 kg ( 22 lbs ) for copper.
Material | Min. Thickness | Min. draft angle |
Aluminum | 0.9 mm ( .035 in ) | 0.5 degrees |
Zinc alloys | 0.6 mm ( .025 in ) | 0.25 degrees |
Copper | 1.25 mm ( .050 in ) | 0.7 degrees |
Company advantages
Excellent dimensional accuracy:
Dimensional accuracy is typically 0.1 mm for the first 2.5 cm and 0.02 mm for each additional centimeter.
Smooth surfaces:
Surface finishes of 1 – 25 μm.Production rate:
The production rate is dependent on cavitation, the number of cavities in a mold. One mold can complete 200 to 300 shots per hour.With smaller parts, it can increase to the thousands.
Detailed parts:
Reproduces any design down to the finest details with thin walls and structures.
Inserts:
Threaded inserts, bearings, and addons can be easily included.
Dimensional accuracy is typically 0.1 mm for the first 2.5 cm and 0.02 mm for each additional centimeter.
Smooth surfaces:
Surface finishes of 1 – 25 μm.Production rate:
The production rate is dependent on cavitation, the number of cavities in a mold. One mold can complete 200 to 300 shots per hour.With smaller parts, it can increase to the thousands.
Detailed parts:
Reproduces any design down to the finest details with thin walls and structures.
Inserts:
Threaded inserts, bearings, and addons can be easily included.
Tensile strength:
Parts have tensile strengths of 60,000 psi or a 415 MPa.
Automation:
Hydraulic and pneumatic equipment are commonly used for efficiency and lower cost.
Parts have tensile strengths of 60,000 psi or a 415 MPa.
Automation:
Hydraulic and pneumatic equipment are commonly used for efficiency and lower cost.
Tolerances:
Produces complex parts with extremely close tolerances.
Produces complex parts with extremely close tolerances.
Company Profile
Packing & Delivery
FAQ
1.Q:Are you a factory or trading company?
A:We are a factory located in Qingdao city. It will take one hour to airport. Welcome all our clients come to visit us.
2.Q:What equipments do you have ?
A:Our factory owns a full set of machining and inspecting equipments, including large CNC machining center, sodick EDM, CNC engraving machine, laser cutting machine, bending machine, laser welder, radial drilling machine, milling machine, CMM, etc.
3.Q:How does your factory do regarding quality control?
A: We test product quality from the very beginning to the very end. Our QC measure and check all the moulds and final products with CMM or other inspection tools regularly.
4.Q:Can you produce according to the samples or the technical drawing?
A: We have professional engineers who can well study samples and drawings. So we surely can produce according to your samples and technical drawings.
A:We are a factory located in Qingdao city. It will take one hour to airport. Welcome all our clients come to visit us.
2.Q:What equipments do you have ?
A:Our factory owns a full set of machining and inspecting equipments, including large CNC machining center, sodick EDM, CNC engraving machine, laser cutting machine, bending machine, laser welder, radial drilling machine, milling machine, CMM, etc.
3.Q:How does your factory do regarding quality control?
A: We test product quality from the very beginning to the very end. Our QC measure and check all the moulds and final products with CMM or other inspection tools regularly.
4.Q:Can you produce according to the samples or the technical drawing?
A: We have professional engineers who can well study samples and drawings. So we surely can produce according to your samples and technical drawings.
5.Q:How to order ?
A: Step 1, please tell us what model and quantity you need;
Step 2, then we will make a PI for you to confirm the order details;
Step 3, when we confirmed everything, you can arrange the payment;
Step 4, finally we deliver the goods within the stipulated time.
6.Q:Delivery Time?
A: Sample order: 1-3 days after receipt of the full payment.
Stock order: 3-7days after receipt of the full payment.
OEM order: 15-35 days after receipt of the deposit.
A: Step 1, please tell us what model and quantity you need;
Step 2, then we will make a PI for you to confirm the order details;
Step 3, when we confirmed everything, you can arrange the payment;
Step 4, finally we deliver the goods within the stipulated time.
6.Q:Delivery Time?
A: Sample order: 1-3 days after receipt of the full payment.
Stock order: 3-7days after receipt of the full payment.
OEM order: 15-35 days after receipt of the deposit.
){kind=link}
Send your message to this supplier
People who viewed this also viewed
Find Similar Products By Category
- Supplier Homepage
- Products
- Casting
- Investment casting
- Galvanized Elbow Coupling 3 Way Pipe Fittings Hose Coupling
Related Categories
Hot Searches
More