Lost Wax Casting Process Iron Foundry Price Steel Aluminium Magnesium Precision Casting

• Customization: Available
• Casting Method: Thermal Gravity Casting
• Process: Lost Wax Casting
• Model NO.: Lost Wax Casting
• Molding Technics: Gravity Casting
• Application: Hardware
• Material: Aluminum Alloy
• Surface Preparation: Sand Blast
• Surface Roughness: Ra6.3
• Machining Tolerance: +/-0.01mm
• Standard: OEM
• Certification: ISO 9001:2000, ISO 9001:2008
• Transport Package: Wooden Case
• Specification: 500*500*500
• Trademark: Landace
• Origin: China

Product Description

Products Description

Brief introduction about high pressure die casting

Die casting is the process where molten metal is injected into a mold under high pressure in the range of 10 - 210 Mpa. This will result in a highly uniform casting with very good surface finish and exceptional dimensional accuracy. Usually this can either eliminate or greatly reduce the machining required to finish the part.We can offer both the cold chamber process and the hot chamber process. In the cold chamber process the metal is ladled into the injection chamber for each shot. There is less exposure of the molten metal to the chamber walls and plunger. This is very useful for aluminum and copper alloys that would easily alloy with iron at elevated temperatures. The hot chamber process has the injection chamber which is connected to the die cavity permanently immersed in the molten metal. The hot chamber process is used for metals of low melting point and high fluidity such as tin and zinc.
The materials that Donrex offers are alloys of aluminum, copper, zinc and magnesium. Zinc castings can be made with thinner wall thickness than aluminum due to high melt fluidity.
We can produce parts from very small to about 50 kg (110lbs ) for aluminum, 10 kg ( 22 lbs ) for magnesium, 80 kg ( 176 lbs ) for zinc and 10 kg ( 22 lbs ) for copper.

Material	Min. Thickness	Min. draft angle
Aluminum	0.9 mm ( .035 in )	0.5 degrees
Zinc alloys	0.6 mm ( .025 in )	0.25 degrees
Copper	1.25 mm ( .050 in )	0.7 degrees

Casting Type	Die Casting, Gravity Casting, Sand Casting, Investment Casting
Material	Aluminum, Magnesium, Zinc, Brass, Stainless Steel
Casting Mold	Design, Fabrication, Test, Modification & Maintenance
Surface Treatment	Sanblasting, Polishing, Plating, Powder Coating, Anodisation etc
Accuracy	Class CT4~CT11
Surface Roughness	Ra1.6~Ra6.3
Machining Equipment	3/4 Axis CNC machining center, CNC engraving machine, CNC milling machine
	CNC turning machine, high precision grinding machine, WEDM etc

Company advantages

Excellent dimensional accuracy:
Dimensional accuracy is typically 0.1 mm for the first 2.5 cm and 0.02 mm for each additional centimeter.
Smooth surfaces:
Surface finishes of 1 - 25 μm.

Production rate:
The production rate is dependent on cavitation, the number of cavities in a mold. One mold can complete 200 to 300 shots per hour.With smaller parts, it can increase to the thousands.
Detailed parts:
Reproduces any design down to the finest details with thin walls and structures.
Inserts:
Threaded inserts, bearings, and addons can be easily included.

Tensile strength:
Parts have tensile strengths of 60,000 psi or a 415 MPa.
Automation:
Hydraulic and pneumatic equipment are commonly used for efficiency and lower cost.

Tolerances:
Produces complex parts with extremely close tolerances.

Recommend Products

Recommended by seller

 

OEM Service Manufacturer Precision Aluminum Bronze Impeller Lost Wax Casting Stainless Steel Investment Casting

$2.00-20.00 / kilogram

200 kilograms

 

Factory Direct Sale Foundry Precision Aluminum Zinc Die Casting Part

$4.00-8.00 / kilogram

100 kilograms

 

OEM Lost Wax Casting Stainless Steel Iron Aluminum Investment Die Casting Parts Casting Services

$2.00-8.00 / kilogram

200 kilograms

Company Profile

Product Paramenters

Product packaging

FAQ

1.Q:Are you a factory or trading company?
A:We are a factory located in Qingdao city. It will take one hour to airport. Welcome all our clients come to visit us.
2.Q:What equipments do you have ?
A:Our factory owns a full set of machining and inspecting equipments, including large CNC machining center, sodick EDM, CNC
engraving machine, laser cutting machine, bending machine, laser welder, radial drilling machine, milling machine, CMM, etc.
3.Q:How does your factory do regarding quality control?
A: We test product quality from the very beginning to the very end. Our QC measure and check all the moulds and final products
with CMM or other inspection tools regularly.
4.Q:Can you produce according to the samples or the technical drawing?
A: We have professional engineers who can well study samples and drawings. So we surely can produce according to your samples and technical drawings.

5.Q:How to order?
A: Step 1, please tell us what model and quantity you need;
Step 2, then we will make a PI for you to confirm the order details;
Step 3, when we confirmed everything, you can arrange the payment;
Step 4, finally we deliver the goods within the stipulated time.
6.Q:Delivery Time?
A: Sample order: 1-3 days after receipt of the full payment.
Stock order: 3-7days after receipt of the full payment.
OEM order: 15-35 days after receipt of the deposit.